Hitachi VSP F1500

Operation type Description Corresponding command
Unlock resource. raidcom unlock resource -resource_name <resource
group name >
Display resource group
information.
raidcom get resource
Add resource group. raidcom add resource -resource_name <resource
group name> [-resource_id <resource group_id > |-
ldev_id <ldev#> | -port <port#> | -port <port#>
<host group name> | -parity_grp_id <gno-sgno> | -
external_grp_id <gno-sgno>]
Delete resource group. raidcom delete resource -resource_name <resource
group name> [-ldev_id <ldev#> | -port <port#> | -
port <port#> <host group name> | -parity_grp_id
<gno-sgno> | -external_grp_id <gno-sgno>]
Host
(see the Provisioning
Guide for the storage
system)
Create host group. raidcom add host_grp -port <port#> -
host_grp_name <host group name>
Set host mode. raidcom modify host_grp -port <port#> [<host group
name>] -host_mode < host mode> [-host_mode_opt
<host mode option> … ]
Register a host to host
group.
raidcom add hba_wwn -port <port#> [<host group
name>] -hba_wwn <WWN strings>
Delete host group. raidcom delete host_grp -port <port#> [<host group
name>]
Display host group
information.
raidcom get host_grp -port <port#> [<host group
name>]
Port
(see the Provisioning
Guide for the storage
system)
Set port. raidcom modify port -port <port#> {[-port_speed
<value>] [-loop_id<value>] [-topology <topology>]
[-security_switch < y/n >]}
Set port attribute. raidcom modify port -port <port#> -port_attribute
<port attribute>
Display port information. raidcom get port [-port <port#>]
Internal volume
(see the Provisioning
Guide for the storage
system)
Create LDEV. raidcom add ldev {-parity_grp_id <gno-sgno> | -
external_grp_id <gno-sgno> | -pool {<pool ID#> |
<pool naming> | snap}} -ldev_id <ldev#> {-
capacity <size> | -offset_capacity <size> | -cylinder
<size>} [-emulation <emulation type>][-location
<lba>] [-mp_blade_id <mp#>]
Display LDEV information. raidcom get ldev {-ldev_id <ldev#> … [-cnt
<count>] | -grp_opt <group option> -
device_grp_name <device group name> [<device
name>]} [-key <keyword>]
Display parity group
information.
raidcom get parity_grp [-parity_grp_id <gno-sgno>]
Create a parity group. raidcom add parity_grp {-parity_grp_id <gnosgno> |
-concatenated_parity_grp_id <gnosgno>... } -
drive_location <drive location>... -raid_type <raid
type> [-encryption {enable| disable}] [-copy_back
Provisioning operations with CCI
5-7
Command Control Interface User and Reference Guide