Hitachi VSP F1500

Operation type Description Corresponding command
{enable|disable}] [- accelerated_compression
{enable| disable}] [- clpr <clpr#>]
Delete a parity group. raidcom delete parity_grp -parity_grp_id <gnosgno>
Define SSID. raidcom add ssid -rcu <serial#> <mcu#> <rcu#>
<id> -ssid <ssid>
raidcom delete ssid -rcu <serial#> <mcu#> <rcu#>
-ssid <ssid>
Display drive information. raidcom get drive [-parity_grp_id <gno-sgno> | -
usage <usage>]
Set a spare drive, or
cancel the setting.
raidcom modify drive -drive_location <drive location>
-spare {enable | disable}
Virtual volume
(HDP, HDPz, HDT,
HDTz, active flash,
active flash for
mainframe, or SS)
(see the Provisioning
Guide for the storage
system)
Create pool for HDP or
HDPz.
raidcom add dp_pool {{-pool_id <pool ID#> [-
pool_name <pool naming>] | -pool_name <pool
naming> [-pool_id <pool ID#>]} | -pool_id <pool
ID#> -pool_name <pool naming>}} {-ldev_id
<ldev#> …[-cnt<count>] | -grp_opt <group option>
-device_grp_name <device group name> [<device
name>]}[-user_threshold <threshold_1>
[<threshold_2>] ]
Create pool for SS. raidcom add snap_pool {{-pool_id <pool ID#> [-
pool_name <pool naming>] | -pool_name <pool
naming> [-pool_id <pool ID#>]} | -pool_id <pool
ID#> -pool_name <pool naming>}} {-ldev_id
<ldev#> …[-cnt<count>] | -grp_opt <group option>
-device_grp_name <device group name> [<device
name>]}[-user_threshold <%> ]
Display pool information
for HDP, HDPz, HDT,
HDTz, active flash, active
flash for mainframe, or
SS.
raidcom get pool [-key <keyword>]
Delete pool for HDP,
HDPz, HDT, HDTz, active
flash, active flash for
mainframe, or SS.
raidcom delete pool -pool {<pool ID#> | <pool
naming>}
Change the threshold
value of a pool for HDP,
HDPz, HDT, HDTz, active
flash, active flash for
mainframe, or SS.
raidcom modify pool -pool {<pool ID#> | <pool
naming>} -user_threshold <threshold_1>
[<threshold_2>]
Restore a pool for HDP,
HDPz, HDT, HDTz, active
flash, active flash for
mainframe, or SS.
raidcom modify pool -pool {<pool ID#> | <pool
naming>} -status nml
Set the maximum rate of
subscription of a pool for
HDP, HDPz, HDT, HDTz,
active flash, or active
flash for mainframe.
raidcom modify pool -pool {<pool ID#> | <pool
naming>} -subscription <%>
5-8
Provisioning operations with CCI
Command Control Interface User and Reference Guide