Figure 5-7 Script examples of internal open-system volume operation
(2/2)
Virtual volume (Dynamic Provisioning) operations
Creating virtual volumes (Dynamic Provisioning)
Use the following provisioning operations to create LDEVs of virtual volumes
(Dynamic Provisioning) and make the LDEVs available to the host.
Step
Operation
overview
Description Executed command
1 Setting port Enable LUN security for the
port. Modify settings such as
port topology and data transfer
speed as needed.
raidcom modify port -port
<port#> -security_switch y
5-26
Provisioning operations with CCI
Command Control Interface User and Reference Guide
To Next Page
Loading...
