Commands
How to issue the command to the virtual
storage machine
Remarks
raidcom Specify the virtual storage machine by the
command option (-s <seq#> or -u <unit
ID>).
The virtual storage machine can be specified
regardless of the description contents of the
configuration definition file.
When you specify a
volume that belongs
to meta_resource for
HORCM_CMD, if you
specify the virtual
storage machine for
the command option,
some commands can
be executed using the
virtual storage
machine information
(see
Operation target
for raidcom
commands when
specifying the virtual
storage machine in
HORCM_VCMD on
page 3-61).
When you specify a
volume that belongs
to a virtual storage
machine for
HORCM_CMD, there is
a limitation of which
command you can
use. You can execute
by using the virtual
storage machine
information if the
raidcom command
can be used and if
you specify the virtual
storage machine for
the command option
(see
raidcom
commands for
volumes that belong
to virtual storage
machine for
HORCM_CMD on page
3-68).
Operation target for raidcom commands when specifying the virtual storage
machine in HORCM_VCMD
The virtual storage machine specified in HORCM_VCMD becomes the
operation target if you do not specify the -s <seq#> (serial number) and -u
<unit ID> (unit ID of the command device) options of the raidcom
commands. The operational targets according to the definition of
HORCM_VCMD are shown in the table below.
• When you specify the virtual storage machine in HORCM_VCMD and the
operation target for the raidcom command is a virtual storage machine,
CCI functions
3-61
Command Control Interface User and Reference Guide
To Next Page
Loading...
