Hitachi VSP F1500

Commands
How to issue the command to the virtual
storage machine
Remarks
pairsyncwait Describe the virtual storage machine
information in HORCM_LDEV in the
configuration definition file.
---
pairmon Describe the virtual storage machine
information in HORCM_LDEV in the
configuration definition file.
---
raidscan Specify the virtual storage machine by the -s
<seq#> or the -p <port#> (to specify the
unit ID) option.
The virtual storage machine can be specified
regardless of the description contents of the
configuration definition file.
You cannot specify a
virtual storage
machine by the -u
<unit ID> option of
the raidscan
command. Use the -s
<seq#> option, or
the -p <port#> to
specify as "CL1-An"
(n is the unit ID).
raidar Specify the virtual storage machine by a unit
ID by the command option (-p <port#>).
The raidar command
has no option to
specify a serial
number nor a unit ID.
Use the -p <port#>
option as "CL1-An"
(specify a unit ID in
n).
raidqry --- The information of
VSP G1000, VSP
G1500, VSP F1500,
VSP Gx00 models, or
VSP Fx00 models and
the virtual storage
machine is displayed.
raidvchkscan Specify the virtual storage machine by the
command option (-s <seq#> or -u <unit
ID>).
The virtual storage machine can be specified
regardless of the description contents of the
configuration definition file.
If you are specifying a
command device in a
virtual storage
machine for which
user authentication is
disabled to the
HORCM_CMD, do not
specify the -v jnl
and -v pid option.
horcctl Specify VSP G1000, VSP G1500, VSP F1500,
VSP G200, G400, G600, G800, or VSP F400,
F600, F800 information.
If you specify the
virtual storage
machine information,
error (No such control
device) occurs.
This command cannot
be used if you specify
a volume belonging to
a virtual storage
machine to
HORCM_CMD.
3-60
CCI functions
Command Control Interface User and Reference Guide