EasyManua.ls Logo

Hitachi VSP F1500

Hitachi VSP F1500
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Command: Pair Creation Pair Splitting
Pairing Status CC: -m cc Simplex -S
(2) COPY Acceptable Accepted (1)
(3) PSUS Rejected Accepted (1)
(4) PSUE PDUB Rejected Accepted (1)
Legend:
Accepted: A command is accepted and executed. When the command execution
succeeds, the status changes to that of the shown number.
Accepted: A command is accepted and executed. When the command execution
succeeds, the status changes to that of the shown number.
Acceptable: No operation is executed, though a command is accepted.
Rejected: Command execution is rejected and the operation terminates abnormally.
Other commands and options (for example, pairresync…) for operating a paired volume
are rejected.
The "-m cc" option cannot be specified with "-split" option in the same command.
Restrictions for Volume Migration
Volume Migration must be used within the following restrictions:
ShadowImage (HOMRCF). The operation for the volume migration
must be operated at the "SMPL" or "PAIR" or "COPY" state. If not,
paircreate -m cc command is rejected with EX_CMDRJE or EX_CMDIOE.
Also ShadowImage cannot be operated to CC_SVOL moving in Volume
Migration. In copying CC_SVOL, the copy operation for the volume
migration is stopped, if the ShadowImage pairsplit command is
executed.
TrueCopy (HORC). The operation for the volume migration must be
performed at the "SMPL" or "PSUS" state. If not, paircreate -m cc
command is rejected with EX_CMDRJE or EX_CMDIOE. Also HORC cannot
be operated to CC_SVOL copying in Volume Migration. On one hand, in
copying CC_SVOL, the copy operation for the volume migration is
stopped, if pairresync command for of HORC is executed.
Data replication operations with CCI
6-43
Command Control Interface User and Reference Guide

Table of Contents

Related product manuals