Hitachi VSP F1500

Step
Operation
overview
Description Executed command
< y|n > | -mp_blade_id
<mp#>}
6 Checking
external
volume
information
Display external volume
information and confirm result
of executing command.
raidcom get external_grp
[-external_grp_id
<gno-sgno>]
7 Setting
external path
Set external path. Execute the
required number of commands.
raidcom add path -path_grp
<path group#> -port
<port#> -external_wwn
<wwn strings>
8 Displaying
external path
information
Display external path
information for and confirm the
result of executing the
command.
raidcom get path [-path_grp
<path group#>]
9 Setting port of
external
storage system
Make enabled the LUN security
of port. Modify setting such as
port topology and data transfer
speed as needed.
raidcom modify port -port
<port#> -security_switch y
10 Creating host
group
Specify port, map LDEV to LUN
and create an LU path.
raidcom add host_grp -port
<port#> -host_grp_name
<host group name>
11 Setting host
mode and host
mode option
Specify port and set host mode
and host mode option for host
group.
raidcom modify host_grp
-port <port#> [<host
group
name>] -host_mode
<host mode>
[-host_mode_opt
<host mode option> … ]
12 Displaying host
group
information
Display host group information
and confirm result of executing
command.
raidcom get host_grp
-port <port#> [<host
group
name>]
13 Adding host to
host group
Register host to host group of
the port.
raidcom add hba_wwn
-port <port#> [<host
group
name>] -hba_wwn
<WWN strings>
14 Displaying
WWN
information
Display WWN of connection
host registered to the host
group and confirm the result of
executing the command.
raidcom get hba_wwn
-port <port#> [<host
group
name>]
15 Creating LDEV Specify external volume group
and create LDEV.
raidcom add ldev
- external_grp_id
<gno-sgno> -ldev_id
<ldev#> {-capacity <size>
| -offset_capacity <size>
| -cylinder <size>}
[-emulation <emulation
type>][-location <lba>]
[-mp_blade_id <mp#>]
16 Creating LDEV
nickname
(arbitrary)
Create nickname of created
LDEV.
This operation is arbitrary.
raidcom modify ldev
-ldev_id <ldev#>
-ldev_name <ldev naming>
5-46
Provisioning operations with CCI
Command Control Interface User and Reference Guide