Hitachi VSP F1500

Ste
p
Operation
overview
Description Executed command
4 Specify the host
group to display the
SPM setting status.
raidcom get spm_group -port <port#>
[<host group name>] -spm_host_grp
5 Specify the SPM
group name to
display the SPM
setting status.
raidcom get spm_group -port <port#>
-spm_group <group_name>
6 Displaying
monitoring
information
of preferred
or
nonpreferre
d WWN
Specify the WWN
name to display
monitoring
information.
raidcom monitor spm_wwn {-hba_wwn
<wwn_strings> }
7 Specify the SPM
group name to
display monitoring
information.
raidcom monitor spm_group -spm_group
<group_name>
8 Registering
WWN to the
host group
registered
in the SPM
group, and
setting the
WWN as the
SPM target
Register the WWN to
the host group
registered in the SPM
group to set the WWN
as the SPM target.
raidcom add hba_wwn -port <port#>
[<host group name>] -hba_wwn <WWN
strings>
9 Deleting
from the
SPM targets
Specify the host
group to delete it
from the SPM target.
raidcom delete spm_group -port <port#>
[<host group name>] -spm_host_grp
10 Delete the host group
to delete it from the
SPM target.
raidcom delete host_grp -port <port#>
[<host group name>]
11 Delete WWN from the
host group to delete it
from the SPM target.
raidcom delete hba_wwn -port <port#>
[<host group name>] -hba_wwn <WWN
strings>
Displaying the WWN of host bus adapters
Displays the WWN of the host bus adapters that are registered in host
groups. Display example:
# raidcom get hba_wwn -port CL4-E-0
PORT GID GROUP_NAME HWWN Serial# NICK_NAME
CL4-E 0 Linux_x86 210000e08b0256f8 63528 ORA_NODE0_CTL_0
CL4-E 0 Linux_x86 210000e08b039c15 63528 ORA_NODE1_CTL_1
Setting the priority on host bus adapters
Set the host bus adapter (WWN: 210000e0,8b0256f8) to the non-prioritized
WWN, and set 5000 [IOPS] as the upper limit.
# raidcom modify spm_wwn -port CL4-E -spm_priority
n -limit_io 5000 -hba_wwn 210000e0,8b0256f8
Provisioning operations with CCI
5-61
Command Control Interface User and Reference Guide