depending on the storage system models. For details about the location,
see System configuration using CCI on page 3-2.
Note: If many commands are issued in a short period of time by using
the out-of-band method, for example issuing commands in a
configuration with VMware Site Recovery Manager (SRM), or from scripts,
the command response might slow. In this case, issuing commands by
using the in-band method is recommended.
Tip: For older versions of CCI that do not support VSP, if you want to
issue a command from a client PC which is not connected to a storage
system directly, you must write a remote shell script which is executed by
your logging in to the CCI server of the in-band method via Telnet or
SSH.
The following figure illustrates in-band and out-of-band CCI operations. For
details about the in-band and out-of-band system configurations, see System
configuration using CCI on page 3-2.
1-6
Overview
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General