Command Product returning the SSB code
• pairsplit
• horctakeover
• horctakeoff
• paircreate
• pairresync
• pairsplit
• horctakeover
• horctakeoff
Universal Replicator
• paircreate
• pairresync
• pairsplit
• horctakeover
• horctakeoff
global-active device
• paircreate
• pairresync
• pairsplit
Hitachi ShadowImage®
• paircreate
• pairsplit
Hitachi Volume Migration
• paircreate
• pairresync
• pairsplit
Hitachi Thin Image
• raidvchkset -vt
• raidvchkset -vs
Database Validator
• raidvchkset -vg Data Retention Utility
• raidvchkset -vext Hitachi Dynamic Provisioning
The following tables provide information about the SSB codes returned by the
replication commands. If you see an error not described in the tables, contact
Hitachi Data Systems customer support.
Table 9-6 SSB codes returned by the paircreate command
paircreate
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Troubleshooting
9-23
Command Control Interface User and Reference Guide
To Next Page
Loading...
