Hitachi VSP F1500

common
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E11 2206 You do not have the operation authority for the
target resource group. Specify the resource group
that is allocated to the user group as the operation
target, or set the operation authority to the user
group in order to operate the target resource
group.
CMDRJE Executing 2E11 2207 The system is locked by another user.
CMDRJE
Get Command
Status
Executing/
Async
2E11 8303 The command cannot be executed because there is
blocked part in the system.
CMDRJE Executing 2E31 9100 The command cannot be executed because the
user authentication is not performed.
CMDRJE
Get Command
Status
Executing/
Async
2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing 2EBE 9E01 The specified parameter is invalid. Check the
Command Control Interface Command Reference .
CMDRJE Executing 2EF3 9300 The specified command cannot be executed due to
the following reasons:
• The command cannot be accepted because it
is not supported.
• The command is not supported in the current
CCI version.
CMDRJE Executing 2EF3 9F02 The specified operation is not supported in the
current microcode version.
CMDRJE Executing 2EF4 0026 The virtual storage machine with the specified
serial number is not found.
CMDRJE Executing 2EFF FF00 The specified operation is not supported in the
current microcode version.
CMDRJE Executing B90F B90F The specified operation is not supported in the
current microcode version.
CMDRJE Executing B954 FF5F The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9EC B9EC The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9EE B9EE The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9FD B90A The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9FD B90C The specified operation is not supported in the
current microcode version.
Troubleshooting
9-25
Command Control Interface User and Reference Guide