oralog oralog3 CL1-A1 5 1
oralog oralog4 CL1-A1 5 1 h1
HORCM_INST
#dev_group ip_address service
oradb HST2 horcm
oradb HST3 horcm
oralog HST3 horcm
Configuration file example — Windows servers
The following table lists the parameters defined in the configuration file and
specifies the default value, type, and limit for each parameter.
Table 2-2 Configuration (HORCM_CONF) parameters
Parameter Default Type Limit
ip_address None Character string 63 characters
Service None Character string or numeric
value
15 characters
poll (10 ms) 1000
Numeric value
1
None
timeout (10 ms) 3000
Numeric value
1
None
dev_name for
HORCM_CMD
None Character string 63 characters
Recommended value =
8 char. or fewer
dev_name for
HORCM_DEV
None Character string 31 characters
CCI software environment
2-15
Command Control Interface User and Reference Guide
To Next Page
Loading...
