Hitachi VSP F1500

the server is connected to two or more storage systems (for example,
CL1-A1 = CL1-A in unit ID 1). If the "n" option is omitted, the unit ID is
0. The port is not case sensitive (for example, CL1-A = cl1-a = CL1-a =
cl1-A).
- Basic Option Option Option
CL1 An Bn Cn Dn En Fn Gn Hn Jn Kn Ln Mn Nn Pn Qn Rn
CL2 An Bn Cn Dn En Fn Gn Hn Jn Kn Ln Mn Nn Pn Qn Rn
The following ports can be specified only for the 9900V:
- Basic Option Option Option
CL3 an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CL4 an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
For 9900V, CCI supports four types of port names for host groups:
¢
Specifying the port name without a host group: CL1-A CL1-An, where
n is the unit ID if there are multiple RAID storage systems
¢
Specifying the port name with a host group: CL1-A-g, where g is the
host group CL1-An-g, where n-g is the host group g on CL1-A in unit
ID=n
The following ports can be specified for USP V/VM and TagmaStore USP/
TagmaStore NSC:
- Basic Option Option Option
CL5 an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CL6 an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CL7 an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CL8 an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CL9 an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CLA an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CLB an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CLC an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CLD an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CLE an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CLF an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
CLG an bn cn dn en fn gn hn jn kn ln mn nn pn qn rn
• Target ID: Defines the iSCSI/Fibre target ID (TID) number of the physical
volume on the specified port.
2-24
CCI software environment
Command Control Interface User and Reference Guide