$HORCC_LOGSZ HORCC_HOST.conf Performing
Unspecified HORCC_LOGSZ=value Global tracing within this CCI instance
HORCC_LOGSZ=0 NO global tracing within this CCI
instance
Unspecified or
nonexistent
Use the default value (0) The same as
the current logging for only command
error
• Examples for execution
/HORCM/log* directory
[root@raidmanager log9]# ls l
total 16
drwxr-xr-x 3 root root 4096 Oct 27 17:33 curlog
-rw-r--r-- 1 root root 3936 Oct 27 17:36
horcc_raidmanager.log
-rw-r--r-- 1 root root 2097452 Oct 27 17:29
horcc_raidmanager.oldlog
-rw-r--r-- 1 root root 46 Oct 27 17:19
horcc_raidmanager.conf
drwxr-xr-x 3 root root 4096 Oct 27 17:19 tmplog
/HORCM/log*/horcc_HOST.log file
COMMAND NORMAL : EUserId for HORC : root (0) Tue Nov 1
12:21:53 2005
CMDLINE : pairvolchk ss g URA
12:21:54-2d27f-10090- [pairvolchk][exit(32)]
COMMAND NORMAL : EUserId for HORC : root (0) Thu Oct 27
17:36:32 2005
CMDLINE : raidqry l
17:36:32-3d83c-17539- [raidqry][exit(0)]
COMMAND ERROR : EUserId for HORC : root (0) Thu Oct 27
17:31:28 2005
CMDLINE : pairdisplay g UR
17:31:28-9a206-17514- ERROR:cm_sndrcv[rc < 0 from HORCM]
17:31:28-9b0a3-17514- [pairdisplay][exit(239)]
[EX_ENOGRP] No such group
[Cause ]:The group name which was designated or the device name
doesn't exist in the configuration file, or the network address
for remote communication doesn't exist.
[Action]:Please confirm if the group name exists in the
configuration file of the local and remote host
/HORCM/log*/horcc_HOST.conf file
# For Example
HORCC_LOGSZ=2048
#The masking variable
#This variable is used to disable the logging by the command and
exit code.
#For masking below log pairvolchk returned '32'(status is
SVOL_COPY)
#COMMAND NORMAL : EUserId for HORC : root (0) Tue Nov 1
12:21:53 2005
#CMDLINE : pairvolchk ss g URA
#12:21:54-2d27f-10090- [pairvolchk][exit(32)]
pairvolchk=32
pairvolchk=22
CCI software environment
2-45
Command Control Interface User and Reference Guide
To Next Page
Loading...
