BASE STATION SETTINGS
34
5.3.2 Audio Fidelity
If you are installing a new base station where all existing headsets are Non-HD or HD (default), you
must select the respective audio delity.
The Non-HD delity setting allows the base to operate in Legacy ION mode, allowing Legacy ION non-HD
headsets to register and communicate.
The HD delity setting offers increased clarity for a more natural sound.
If you select Automatic, the delity of the base will be set by the rst headset registered.
Note: The delity setting you select will be used for all registered headsets. It is important that
the delity setting matches the capability of the headsets to be registered with the system.
To adjust this setting:
1. Select Audio Fidelity from the ADVANCED
INSTALLER SETUP display.
2. Press the Select Fidelity button repeatedly to toggle
and select an option.
Press the Back button to save the setting.
CAUTION: Making this change will require re-registering all headsets.
To Next Page
Loading...