BASE STATION SETTINGS
83
5.7.8 Installer Setup
See Section 5.2, pg. 27, for Basic Installer Setups and Section 5.3, pg. 33, for Advanced Installer Setups.
5.7.9 Network
See Section 5.5, pg. 41, for Network settings.
5.7.10 Diagnostics
The Diagnostics button is available if you experience a problem with EOS|HD operation and you need to
call HME Technical Support. The Technical Support representative will guide you through the automated
diagnostics.
1. Select Menu on the base station LANE STATUS
display and then press the More button on the MAIN
MENU.
2. On the ADVANCED STORE SETTINGS display, press
the VAA button and then press the VAA button to
select ✔ (on) or − (off).
3. If requested, press the More button on the
DIAGNOSTICS display for additional diagnostics.
To Next Page
Loading...