Scanreco G2 radio remote control system
HMF Technical Service Department
Indications, remote control box
The remote control box has two diodes and a buzzer which indicate the functional status.
The remote control box is deactivated
The remote control box is activated and data are transmitted.
once per sec.
The remote control box is activated and data are transmitted.
The battery is discharged. In case of low battery level the buzzer gives a
periodic signal at the first 3 flashes of the diode.
The crane is working in normal mode.
The crane is working at reduced speed, 1-5 steps. See Instruction
Manual.
To Next Page
Loading...