HMF Scanreco G2 - Assessing Radio Signal Quality

Scanreco G2 radio remote control system
43
HMF Technical Service Department
Rev.: 20-13
The quality of the radio signal
The quality of the radio signal can be examined by means of indications from the external diodes
of the radio controller and the internal LED display.
Status
LED display
Explanation
Green lit
I H constantly lit
Optimum quality of the radio signal and normal radio
communication.
Green flashing
I H flashing
There are short interruptions of the radio signal and
thereby loss of data packets. The faster it flashes - the
weaker the radio reception.
Red lit
Rotating LED
segment
The radio controller is in stand by mode.
No radio communication.