Scanreco G2 radio remote control system
HMF Technical Service Department
Set-up guides
Installation of the radio controller
• To ensure optimal radio communication the radio controller must be fitted in as high a place as
possible and with as much space around it as possible. If the antenna is surrounded by fixed
objects, this will weaken the radio reception. It may be necessary to connect an external
antenna.
• The antenna must not touch metallic parts.
• The radio controller must be fitted on a bracket free of vibrations and must be at a distance
from heat coming from for example the exhaust system of the engine.
• The electric cables must turn downwards and away from the radio controller.
• Grease the internal plug connections with water repellent grease meant for electronic
components.
To Next Page
Loading...