151
Tools and Materials Required
Tools
2 - Medium Sized Flat Blade Screwdrivers
1 - Medium Sized Channel Lock Pliers
1 - 3/4” (19 mm) Open End Wrench
1 - 15/16” (24 mm) Deep Well Socket
1 - 1 1/8” (28 mm) Deep Well Socket
1 - 1/2” Drive Rachet Wrench
1 - 1/2” Drive Torque Wrench
1 - Spanner socket (weldment tool)
(Supplied in your Tool Kit)
1 - 6 mm Allen Wrench
1 - Feeler Gauge .015”
1 - Small Hammer
Supplies
• Anti-Seize
• Grease Gun and Mobile Poly Rex EM Grease
• Rags or Paper Towels
• Brake Cleaner
NOTICE:
USE ANTI-SEIZE COMPOUND ON BOLT AND THRU-SHAFT
THREADS AND THREADED HOSE CONNECTIONS TO
PREVENT GALLING.
INJURIES FROM ULTRA-HIGH PRESSURE WATER BLASTING
IS VERY SERIOUS AND CAN RESULT IN A FATALITY. ALWAYS
MAKE SURE ALL PERSONNEL ARE A SAFE DISTANCE
FROM THE WORK AREA BEFORE THE PRESSURE PUMP
IS ENGAGED. NEVER PUT HANDS, FEET OR ANY PART OF
YOUR BODY IN OR NEAR THE HIGH PRESSURE STREAM.
To Next Page
Loading...
Need help?
General