BF15DoBF20D
13)Turn the piston rod of the outer tube/piston rod assembly
upside down and check whether the piston rood
is
extended fully.
14)Pour the fresh ATF into the cylinder and outer tube up to
the top edge
of
the cylinder and outer tube.
15)lnstall the valve body on the outer tube that had been
filled with the ATF in the previous step 14, and tighten the
valve body
Install the valve body with care not to spill the ATF in
the outer tube/piston rod assembly.
111
Pour
the
ATF up
to the
/
[2]
OUTER TUBE
[3]
CYLINDER
11
I
/
VALVE
BODY
ASSEMBLY
12-33
To Next Page
