TUXEDOW INSTALLATION AND SETUP GUIDE
27
How to Add a User
1. Touch the Setup, System Setup, User Setup
icons.
2. Touch
and enter the Authorized Master Code.
3. Select the Partitions, and access level for this
user; Master, Normal, Guest or No Access.
4. Touch the box next to User Number and enter an
“available” (3-digit) user number.
5. Type the user name (6 characters max.; no spaces
between characters).
6. Touch the box next to RF Button Zone (if used);
enter the 3-digit RF Button Zone for this user.
7. Touch
to Save the user information or touch
the Back
arrow to return to the previous screen.
On the Data Entry screen, enter the user
information.
• Use the Shift key for capital letters
• Use the BS (Backspace) key to make
corrections.
• The @#$ key is not available for use at this time.
These characters cannot be saved to the control
panel.
The authorized code for adding users is dependent
upon the control panel you are interfacing with.
Check your control panel Users Guide to determine
who can add users.
If assigning this user to wireless key, enter one of
the zone numbers of the keyfob (the wireless key
must be programmed first before it can be
assigned to a user).
Select the partitions, access level, and enter an
available user number for this user.
For available user numbers, see the control
panel instructions.
How to Add an Existing User to a Second Keypad
After adding a user to the first keypad, the same user can be added to a second keypad. From the second keypad go to “User
Setup” and enter the same user name and same user code (refer to How to Add a User above). The second keypad will
automatically update the user information. Touch Save.
How to Delete a User
1. Select the User you want to delete.
2. Touch the X icon on the lower right-hand corner
3. Enter your Authorized code.
The Confirm Delete
screen is displayed.
Three selections are available: add a user, edit a user,
or delete a user.
The authorized code for deleting, adding, and editing
users is dependent upon the control panel you are
interfacing with. Check your control panel User Guide
to determine who can delete, add, and edit users.
How to Edit a User
Note: You cannot edit a User’s name or number. To modify a User name or number, you must delete the User and re-enter
User.
Edit a user as follows:
1. Select the User you want to edit.
2. Enter your Authorized code.
3. Select the options needed for this user
and touch
to Save.
Three selections are available: add a user, edit a user, or
delete a user.
Note: The authorized code for deleting, adding, and editing
users is dependent upon the control panel you are
interfacing with. Check your control panel User Guide to
determine who can delete, add, and edit users.
To Next Page
Loading...
Need help?
General
