Honeywell ADE ACCENTA Gen4 User Manual

- - - - -- --
Honeywell
ADE Gen4
- - ------.---- -
User Guide
G4
ACCENTA
@
@
I
CD 00 0
0006
0®®0
0@@0
-----
6-6
T---,CD~0"0~0=-' -------------------
0006
0®®0 6-6
0@@0
Servicing Organisation (Installer) name: ______________ _
Telephone Number:
_____________________ _
Date of Installation:
_____________________ _
AccountNumber: ______________________ ~
~-----~ -~--- - - ----~ ------;;-- --------~~-~-----:-~~-~~~.--~-~~--~-.::::------~--~-~
- _____ ::.--"'- ___________ ~ - _______ ~ _ _ - ~ - -.~ ~ _:;".0 ~ _ ~~ - - • <
I

Honeywell ADE ACCENTA Gen4 Specifications

General

Model	ADE Accenta Gen4
Partitions	1
Zones	8
Keypad	LCD Keypad
Outputs	Programmable outputs

Summary

System Introduction and Core Functions

Introduction to the User Guide

Explains the purpose of the User Guide and assumptions about the installer.

Alarm System Operation Basics

Explains how the alarm system is operated via keypad and indicators.

Power Indicator Functionality

Details the function of the power indicator and troubleshooting for faults.

Signalling Device Explanation

Explains the function of a signalling device and its connection to an ARC.

Alarm Codes and Security Management

Details the requirements for alarm system codes, including default and length.

Personal Attack Alarm Activation

Describes how to activate a personal attack alarm using keypad buttons.

Fire Zone Alarm Procedures

Explains the alarm sound and actions for fire detection via zones 7 and 8.

System Setting and Unsetting Procedures

How to Set the System (LCD Keypad)

Step-by-step instructions for setting the system using an LCD keypad.

How to Set the System (LED Keypad)

Step-by-step instructions for setting the system using an LED keypad.

How to Unset the System (LCD Keypad)

Instructions for unsetting the system using an LCD keypad.

How to Unset the System (LED Keypad)

Instructions for unsetting the system using an LED keypad.

How to Part Set the System (LCD Keypad)

Steps to part set the system using an LCD keypad, including program selection.

Alarm Management and Zone Configuration

How to Silence and Reset Alarm (LCD Keypad)

Procedure for silencing an alarm and resetting the system using an LCD keypad.

How to Silence and Reset Alarm (LED Keypad)

Steps to silence an alarm and reset the system using an LED keypad.

How to Omit Zones (LCD Keypad)

Instructions for omitting zones using an LCD keypad.

System Features and Customization

How to Quick Set the System

Procedure to reduce the system exit and set time to five seconds.

Single Key Setting Operation

How to initiate the setting process using a single 'Set' button.

How to Set Up Chime Mode (LCD Keypad)

Steps to set zones to chime mode using an LCD keypad.

How to Set Up Chime Mode (LED Keypad)

Steps to set zones to chime mode using an LED keypad.

User and Security Code Management

Changing User 1 Codes (LCD Keypad)

Steps to change user code 1 using the LCD keypad.

Changing User 1 Codes (LED Keypad)

Steps to change user code 1 using the LED keypad.

Changing User 2 Codes (LCD Keypad)

Steps to change user code 2 using the LCD keypad.

Changing User 2 Codes (LED Keypad)

Steps to change user code 2 using the LED keypad.

Deleting User Code 2 (via User 1, LCD Keypad)

Procedure to delete user code 2 using user code 1 with LCD keypad.

Deleting User Code 2 (via User 1, LED Keypad)

Procedure to delete user code 2 using user code 1 with LED keypad.

Deleting User Code 2 (via User 2, LCD Keypad)

Procedure to delete user code 2 using user code 2 with LCD keypad.

Deleting User Code 2 (via User 2, LED Keypad)

Procedure to delete user code 2 using user code 2 with LED keypad.

Advanced Features and Monitoring

Duress Code Functionality

Explains the purpose and operation of the duress code for hold-up situations.

Viewing the Event Log (LCD Keypad)

Steps to access and navigate the event log on the LCD keypad.

Viewing Specific Event Log Entries

Procedure to locate and view specific events within the event log.

System Testing and Diagnostics

Testing Bell, Strobe, and Sounder

Procedure to test the alarm outputs: Bell, Strobe, and Internal Sounder.

Alarm System Testing (LCD Keypad)

Steps to perform alarm tests using the LCD keypad, including menu navigation.

Alarm System Testing (LED Keypad)

Steps to perform alarm tests using the LED keypad, including menu navigation.

How to do a Walk Test (LCD Keypad)

Procedure for conducting a walk test using the LCD keypad.

How to do a Walk Test (LED Keypad)

Procedure for conducting a walk test using the LED keypad.

System Configuration and Maintenance

Setting the Time and Date (LCD Keypad)

Steps to set the system's time and date using the LCD keypad.

Setting the Time and Date (LED Keypad)

Information on setting time/date via LED keypad, noting limited visual feedback.