! How
to
Set Up tbe Time & Date J
User Guide
How to Set up the Time and Date
LCD
Keypad:
Press CD and then enter your code [0][1][2][3]. The
Iil
LED goes off, indicating that you are in Programming
mode.
The first menu
Walk
Test appears on the screen.
Press [4] and the
Time
and
Date
Screen appears.
The
Time
can be modified in hours, minutes and seconds
in the format HH:MM:SS. The number keys on the
keypad 0-9 are used for this function. As each digit
is
modified the cursor moves to the next one. When the time
is
correct press
Q)
to accept the change and move
to
the
next screen
or
to cancel the change press ® twice.
The
Date
can be changed in
day,
month, year format
DD-MM-
YY.
The number keys on the keypad 0-9 are used
for this function.
As each digit
is
modified the cursor moves to the next one.
When the date is correct press
Q)
to accept the change or to
cancel the change press
® twice.
LED
Keypad:
CD
then [0][1)[2)[3]
I
lo>walk
Test
I
[4]
Time
and
Date
Time?
13:46:17
I
Q)
Time
and
Date
Date?
17-05-06
Q)
I
14>set
Up
'rime
and
Date
If
required, the time and date can be entered as per the procedure for the LCD keypad. However no
information will be indicated on the LED keypad. The only indication on the LED keypad that you are
in menu 4,
Set
up
Time
and
Date,
is
that LEDs 1 to 6 on the LED Keypad will
be
ON.
19
To Next Page
Loading...
