Honeywell ADE ACCENTA Gen4 - Deleting User Code 2 (via User 1, LCD Keypad); Deleting User Code 2 (via User 1, LED Keypad)

How to Delete User Code 2
User Guide
How to Delete User Code 2
You can delete the second code to prevent it being used. User 1 or user 2 can delete user code 2.
CD then [0][\][2][3]
To delete user code 2 using user code 1
IO>Walk Test
I
LCD Keypad:
Press CD and then enter your code [0][1][2][3]. The
~
00 LED goes off to indicate that you are in Programming
"
mode. The first menu
Walk Test appears on the screen.
s>set Up
I)
I
.User 1
Press [8] on the keypad to enter User Set-Up.
Press [2] to edit user code 2.
I~~~~ Code
I
Press G to delete user code 2.
G
I
I Code
Deleted
The message
Code Deleted is displayed on the screen.
I
Press ® twice to exit Programming mode. The 00 LED
®
comes on and the screen displays the date and time.
I
01-Jan
I Sunday
14:10
CD then [0][11[2][3]
LED Keypad:
1~-:::-l
___ @$OS
Press CD and then enter your code [0][1][2][3]. The 00
@@@@@@:@@ c ® :
@i)~ ;
LED goes off to indicate that you are in Programming
@UI !
mode.
Press [8] on the keypad to enter User Set-Up. LEDs I
and 2 are on.
11
I.i
"
Press [2] to edit user code 2. LEDs 1-4 are on.
Press
G to delete user code 2.
User code 2 is deleted. LEDs 1-4 are off.
Press
® twice to exit Programming mode. The 00 LED
comes on and the .? LED goes off.
12