Honeywell ADE ACCENTA Gen4 User Manual

--
How to Unset the System
User Guide
How to Unset the System
When you enter your premises you need to unset (tum off) the system.
LCD Keypad:
Sunday 01-Jan
Enter the premises by the agreed entry route. The system
produces an entry tone. The
rJ LED is on and the Iil LED is
14:10
I
off, indicating that the system is set.
[ 4-digit code]
Enter your 4-digit code (0 123 default).
I
**
The system unsets with a double beep. The
Iil LED comes
on, indicating that the system is unset.
After 30 seconds the system displays the date and time.
Ol-Jan
SYSTEM UNSET
14:10
LED Keypad:
Ii]
Enter the premises by the agreed entry route. The system
~
SOS
6
produces an entry tone. The
rJ LED is on and the Iil LED is off,
indicating that the system is set.
[4-digit code]
Enter your 4-digit code
(0123 by default).
*=~
The system unsets with a double beep. The ri1 LED comes on
6
indicating that the system
is unset.
.
!i-
..
. ..
tt:
If any Zone, ,? (Tamper) or sos (Attack) LEDs come on then an alarm has occurred, and an intrusion
may have taken place. Seek assistance before investigating further as intruders may still be on the
premises. Then reset the system.
When you enter your premises you have a short period of time, usually 30 seconds, to enter your code.
If you fail to do this the system goes into alarm. Enter your code to stop the alarm.
4

Honeywell ADE ACCENTA Gen4 Specifications

General

Brand	Honeywell
Model	ADE ACCENTA Gen4
Category	Security System
Language	English