Data Field Programming
4-17
FIELD
TITLE and DATA ENTRIES EXPLANATION
*180
Zone Bypass Limit
0 = unlimited zone bypasses in each partition
1-7 = number of zone bypasses allowed in
each partition
Select the maximum number of zones that can be
bypassed.
Each partition individually uses this entry.
*181
AC and Clock Display Options
0-15 = desired options based on chart at
right.
Use the following table to select the desired options for
real-time clock synchronization (50Hz, 60Hz, Crystal),
AC loss display (independent of AC loss report enabled
in *62), and clock display (time displayed on bottom
line of alpha keypads).
X10 NOTE: “X10” (powerline carrier devices) use the
selected AC frequency to communicate with the
control.
Entry AC Freq. Crystal for AC Loss disp Clock disp
0 60Hz clock backup no no
1 50Hz clock backup no no
2 60Hz clock no no
3 50Hz clock no no
4 60Hz clock backup yes no
5 50Hz clock backup yes no
6 60Hz clock yes no
7 50Hz clock yes no
8 60Hz clock backup no yes
9 50Hz clock backup no yes
#+10 60Hz clock no yes
#+11 50Hz clock no yes
#+12 60Hz clock backup yes yes
#+13 50Hz clock backup yes yes
#+14 60Hz clock yes yes
#+15 50Hz clock yes yes
*182
Summer Time Switchover Day
0 = switch on Sunday morning
1= switch on Saturday morning
2 = switch on Friday morning
Select the appropriate summer time switchover day.
*183
Date/Time Format
0 = 12-hour time/MMDDYY date
1 = 12-hour time/DDMMYY date
2 = 24-hour time/MMDDYY date
3 = 24-hour time/DDMMYY date
Select the desired time and date format.
*185
Downloader Suppression
Options
0 = no suppression
1 = suppress user code viewing
2 = suppress commands and program
download when armed
3 = suppress user code viewing, commands,
and program download when armed*
Select the desired options.
*Must be “3” for EN50131-1/prEN50131-3 compliance
To Next Page
Loading...
