7. Clean the sensor electrode panel in a solution of isopropanol lamp cleaner (included,
along with cleaning swabs, in a PID Lamp Cleaning Kit, part number 500-0014-010,
package of 10), and allow it to dry.
8. Clean the lamp’s window with a cleaning swab dipped in isopropanol lamp cleaner, and
allow it to dry. Do not touch the lamp window with your fingers, as the residual oils will
shorten its life.
9. Inspect the electrical contacts. Clean them with a swab dipped in lamp cleaner if they
appear to need cleaning (make sure the contacts are not pressed down when you are
done):
AreaRAE 106 User Manual
To Next Page
Loading...
