Broadcast On Alarm And Remote Unit Sleep/Wakeup
Using Safety Suite Responder, you can control remote functions in the AreaRAE Plus/Pro.
1. Turn on your AreaRAE Plus/Pro.
2. Start Safety Suite Responder for your system.
3. Click “Dashboard”
4. Program the “Broadcast this message” settings. Select “Broadcast this message” to send
a message to the entire system (via ISM or Wi-Fi) when an instrument goes into alarm.
You can set the Alarm Interval to the time after each alert to be repeated (this is set in
seconds; 2 seconds is the default value).
You can select specific units on the network to wake or put to sleep, as well as send a message
that you type in the “Message” field.
Send Message/Broadcast message
Type a message that you want to send:
Click the icon of an instrument that you want to send a message to:
Click "Send Message"
AreaRAE 28 User Manual
To Next Page
Loading...
