Honeywell AreaRAE Plus User Manual

Enter Programming in Advanced Mode
1. To enter Programming Mode, press and hold [MODE] and [N/-] until you see the
Calibration screen. No password is necessary in Advanced Mode.
2. Press [N/-] to step through the programming screens.
Note: Holding down [N/-] advances quickly through the menu options.
When a menu item is selected, its name is shown at the top of the screen, and its icon is
enlarged.
To enter a menu and view or edit parameters in its submenus, press [Y/+].
AreaRAE 52 User Manual

Honeywell AreaRAE Plus Specifications

General

Wireless	Yes
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Sensor Type	Electrochemical, catalytic bead, PID
Gases Detected	Oxygen (O2), Combustible gases (LEL), Hydrogen Sulfide (H2S), Carbon Monoxide (CO), VOCs
Wireless Protocol	Bluetooth
Display Type	LCD
Pump	Internal pump
Alarms	Visual, audible, and vibration
Gas Sensors	LEL, PID
Humidity Range	10% to 95% RH (non-condensing)