EasyManua.ls Logo

Honeywell AreaRAE Plus - Battery Management

Honeywell AreaRAE Plus
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Battery
Always make sure the battery is fully charged before using the AreaRAE Plus/Pro. Only use this
battery pack in the AreaRAE Plus/Pro (PGM-65XXX):
Standard-duration rechargeable Li-ion battery (PN: W01-3007-000 or W01-3007-100)
WARNING
To reduce the risk of ignition of hazardous atmospheres, recharge, remove or replace the
battery only in an area known to be non-hazardous! Do not mix old and new batteries or
batteries from different manufacturers.
Charging
Note: Batteries should be charged in an environment where the temperature is in the range of
32° to 104° F (0° to 40° C).
Follow this procedure to charge the AreaRAE Plus/Pro:
1. Remove the cover over the AreaRAE Plus/Pro’s power port.
2. Plug the AC/DC adapter’s barrel plug into the AreaRAE Plus/Pro’s power port.
AreaRAE 44 User Manual

Table of Contents

Other manuals for Honeywell AreaRAE Plus

Related product manuals