Turning the AreaRAE Plus/Pro On and Off
Turning the AreaRAE Plus/Pro On
With the instrument turned off, press and hold the [MODE] key until the beep sounds and the
display and LED alarm lights turn on. Then release the [MODE] key.
A RAE Systems logo (or a company name) should appear first. This is followed by a progression
of screens that tell you the AreaRAE Plus/Pro’s current settings.
Pausing to View Screens During Startup
Press the [MODE] button anytime during the startup sequence to pause the progression. This
allows you to view the information for as long as you like. To resume the progression, press
[MODE] again. Even if you pause the progression of screens, the startup process is not
interrupted.
Note: To speed up the startup time, the number of screens shown on startup can be reduced by
enabling the Fast Startup option under Programming/Monitor.
Then the AreaRAE Plus/Pro’s main reading screen appears. It displays instantaneous readings
similar to the following screen (depending on the sensors installed) and is ready for use.
Note: If the battery is completely empty, then the display briefly shows the message “Battery
Low,” and the AreaRAE Plus/Pro shuts off. You should charge the battery or replace it with a
fully charged battery before turning it on again.
AreaRAE 47 User Manual
To Next Page
Loading...
