Change Meas. Gas
The AreaRAE Plus/Pro has extensive onboard gas libraries for combustible gases and VOCs that
you can use to configure your AreaRAE Plus/Pro to automatically apply the appropriate
correction factors and produce readings in the units of the desired combustible gas or VOC.
Measurement gases are organized in four lists:
l My List is a customized list of gases that you create. It contains a maximum of 10 gases
and can only be built in Safety Suite Device Configurator (SSDC) on a PC and transferred
to the instrument.
Note: The first gas in the list is always isobutylene (it cannot be removed from the list).
l Last Ten is a list of the last ten gases used by your instrument. The list is built
automatically and is only updated if the gas selected from Custom Gases or Library is not
already in the Last Ten. This ensures that there is no repetition.
l Gas Library is a library that consists of more than 200 gases for the PID sensor and more
than 50 for the catalytic LEL sensor.
l Custom Gases are gases with user-modified parameters. Using Safety Suite Device
Configurator (SSDC), all parameters defining a gas can be modified, including the name,
span value(s), correction factor, and default alarm limits.
AreaRAE 65 User Manual
To Next Page
Loading...
