3. Press [Y/+] to enter the “Password” screen:
The AreaRAE can communicate with Safety Suite Device Configurator (SSDC). At this
point, you can change the password or Secure In Place setting in Safety Suite Device
Configurator (SSDC).
4. Start Safety Suite Device Configurator (SSDC).
5. Click on the device's serial number to view the settings.
6. Scroll down to "Instrument User Preferences". View and/or change the password in the
"Passcode" window.
Note: The password screen only remains viewable for one minute. After that minute,
AreaRAE 2 returns to the locked main reading page. Therefore, make changes quickly. If
the screen returns to the locked page, repeat the process, beginning with step 2.
7. Upload the change to the AreaRAE by clicking "Save".
AreaRAE 82 User Manual
To Next Page
Loading...
