Honeywell BW MaxXT II User Manual

HIGH displays, and and J flashes. Press to
acknowledge the alarm and initiate the pump block test.
7. Alarm Setpoints
Note: Alarm setpoints vary by region. Refer to See "Resetting Gas Alarm Setpoints" on
page62 for more information..
If the CO and/or H
2
S sensor is enabled, the alarm setpoints for the time-weighted
average (TWA) and the short-term exposure limit (STEL) display.
Next, the LOW and HIGH alarm setpoints display for all of the enabled sensors.
BW MaxXT II 19 User Manual

Honeywell BW MaxXT II Specifications

General

Brand	Honeywell
Model	BW MaxXT II
Category	Gas Detectors
Language	English