Honeywell BW MaxXT II - Datalog Interval Configuration; Setting the Datalog Recording Interval

To enter normal operation, the sensor must be operating correctly. Refer to See
"Troubleshooting" on page98 for more information. See "Replacing a Sensor or Sensor
Filter" on page91 for more information..
The detector is shipped with the Lockout on Self-Test Error option disabled.
Datalog Interval
The Datalog Interval (seconds) field defines how often the detector records a datalog sample
(every 1-120 seconds). You can find this option under the Settings tab to enter the desired value.
BW MaxXT II 33 User Manual