CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
111
IP Requirements The BACnet Feature
8.7 IP Requirements
IP Port Settings
The following IP ports must be available to the CGW-MB:
8.7.1 Single Panel Architecture
Direct panel connection — a connection is made directly to a supported fire panel or
annunciator. Refer to “Single Panel Connecting to BACnet via CGW-MB” on page 111 for
connection topology details.
Figure 8.1: Single Panel Connecting to BACnet via CGW-MB
Refer to “Compatible Equipment” on page 109 for supported panels and annunciators.
Ports Range Type Direction Purpose
47808 to 47823 UDP Input/Output
BACnet feature communications
To Next Page
Loading...
