Need help?Do you have a question about the Honeywell Centraline FALCON and is the answer not in the manual?
General| Series | Centraline |
|---|---|
| Type | Control Unit |
| Model | FALCON |
| Category | Control Unit |
| Communication Protocols | BACnet IP, BACnet MS/TP, Modbus TCP, Modbus RTU, Niagara Fox |
Overview of the Excel Web controller's capabilities and integration with automation systems.
Information on the software versions and firmware supported by the user guide.
Details on how to access the Excel Web controller via web browsers and touch-screen devices.
Steps for connecting and establishing a modem connection to the Excel Web controller.
Creating, editing, and deleting user accounts and managing profiles.
Assigning predefined user levels to functions to create access rights lists.
Procedure for creating new user profiles with specific settings.
Steps to modify or remove existing user profiles.
Viewing project details and controller information.
Describes inputs and outputs connected to hardware devices like sensors and actuators.
Explains computed values and parameters within the application program, not directly hardware-connected.
Details how controllers communicate to read and set datapoints from other controllers or devices.
Daily and weekly time programs that switch datapoints by setpoints or statuses.
Project-wide exception days or periods used to influence scheduling.
Defines configuration and tuning for application programs within control loops.
Sets the target execution time in milliseconds for control loop restarts.
Configures interface settings for serial ports, Ethernet, LON, Modem, and Web Server.
Defines events and their connection to notification messages for recipients.
Procedures for starting the interface and navigating through its sections.
Managing users, access rights, and profiles.
To Next Page