USER GUIDE FALCON
235 EN2Z-0962GE51 R0715
2. Click the CLOSE button after having viewed the alarm details.
Control Loops
Please refer also to the "Control Loops" section, p. 115.
View Control Loop Information
Procedure 1. In the tree, expand the Advanced item and navigate to the control loop, you
want to display.
2. Click on the control loop.
RESULT: On the right, the Control Loop displays information such as name
and description, execution parameters and access rights.
General
Displays name and description of the control loop.
Cycle Information
• Cycle Time Category
The cycle time category defines in ms how often the loop will
be automatically executed by the controller. Cycle times are
grouped in the following categories: Slow, Medium, Fast,
Very Fast.
• Last Execution Time
This is the actual execution time in ms of the loop. Allows,
e.g. detecting overruns by comparing the actual execution
time with the assigned cycle time.
• Priority for Writing
Displays priority with which the loop writes to the output.
Access Rights
Displays access rights.
NOTE:
To Next Page
Loading...
