Honeywell Centraline FALCON - Setting and Detecting Manual Overrides of Analog, Binary, Multi-State, and Pulse Inputs

USER GUIDE FALCON
97 EN2Z-0962GE51 R0715
The priority level ´1 Manual Life Safety` shows the status of the
manual override switch or potentiometer on the LON module.
No Error Detected No fault has been detected.
No Output
Acknowledged Service has failed, or Hardware may be
not connected
Setting and Detecting Manual Overrides of Analog, Binary, Multi-State, and Pulse Inputs
Procedure 1. In the Details dialog box of the selected datapoint, select the Values tab.
2. Click the Manual radio button and enter the value into the field.
Or, to override an analog or binary input datapoint physically, adjust the
override control on the module.
3. To detect and view if an input datapoint is in manual override, you can select
the Datapoints screen.