FALCON USER GUIDE
EN2Z-0962GE51 R0715 204
System Settings
System settings include the following settings:
• System date, time and time zone
• Cycle time category (see also "Cycle Time Category" section).
• Communication settings which include:
− Interface settings for serial ports, Ethernet, LON, Modem and Web-
Server, such as baudrate, IP address, neuron chip ID, automatic logout
time of web server
− User name and password definition
− Selection of the serial port for modem connection
− Selection of remote front-end
− Dial out parameter (re-dial algorithm) definition
View/Change Clock Settings
Procedure 1. In the tree, expand the Advanced item, then the System Settings item and click
on Clock.
RESULT: On the Date & Time tab on the right, the following clock values are
displayed (see next page):
Date
Displays current system date.
Time
Displays current system date.
Time Zone
Displays the current time zone.
2. To change the system date, enter the new system date in the New System
Date fields, or click BROWSE button and select date in the calendar.
3. To change the system time, enter the new system time in the New System
Display Time fields.
4. To change the time zone, click on the Time Zone Tab.
To Next Page
Loading...
