USER GUIDE FALCON
185 EN2Z-0962GE51 R0715
• Command Priorities
Change Relinquish Default value
See "View / Edit Command Priorities" section as follows.
• Event Enrollments
View/Edit event enrollment alarming
See "View / Edit Event Enrollment Alarmings" section as follows.
View General Properties
Procedure 1. In the Details dialog box of the selected datapoint, select the General tab.
Here the following datapoint details are shown:
Properties
• Type
Shows datapoint type, e.g. analog input, binary input etc.
• #States
Shows the number of states of a multi-state datapoint (applies to MI, MO,
MV datapoints only).
• Description
Shows a detailed description
LON Mapping (not applicable to AV, BV, and MV datapoints)
Here you can view LON Mapping details such as:
• Mapping
Shows the Mapping type, e.g. PV = Present Value
• NV Name
Shows the name of the NV, e.g. NViInsideAirTemp
• NV Type
Shows the type of the NV, e.g. SNVT_temp
To Next Page
Loading...
