Honeywell Centraline FALCON User Manual

FALCON USER GUIDE
EN2Z-0962GE51 R0715 70
Time of Last Reset
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface
HTML Interface CARE
Editing -
Equivalent
Shows the time of the last reset of a binary output or pulse converter datapoint.
Transition Events
Datapoint Type
AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing
"see Reporting" x
Equivalent Event
Defines which transition type (To-Off-Normal, Back To-Normal, and/or To Fault) will
be reported and tracked by time stamping. The timestamps can be seen in the Excel
Web HTML Interface.
See also "Event" and "Reporting" sections.
Type
Datapoint Type
AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing
-
Equivalent
Shows the datapoint type, e.g. analog input, digital output, etc.
With Switches / 3 Position Output
Datapoint Type
AI AO AV BI BO BV MI MO MV PC RI RO
User Interface
HTML Interface CARE
Editing x
Equivalent
The With Switches / 3 Position Output options are not visible in the Excel Web
HTML Interface, but only in CARE.
Defines whether the point transmites a continuous signal and is on a board with
switches (AO, BO), or if the point is a 3 position output (AO).
Write Access Level
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface
HTML Interface CARE
Editing - x
Equivalent
The write access level can be defined and changed in CARE only. In the Excel Web
HTML Interface, the write access level is displayed only.
The write access level assigned to a datapoint determines which user level can write
values (properties) to that particular datapoint on the Excel Web HTML Interface.

Honeywell Centraline FALCON Specifications

General

Series	Centraline
Type	Control Unit
Model	FALCON
Category	Control Unit
Communication Protocols	BACnet IP, BACnet MS/TP, Modbus TCP, Modbus RTU, Niagara Fox