Honeywell Centraline FALCON - Bacnet Object ID

FALCON USER GUIDE
EN2Z-0962GE51 R0715 50
BACnet Object ID
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface
HTML Interface CARE
Editing -
Equivalent
The BACnet object ID is part of the internal BACnet addressing in every BACnet
system (BACnet communication). The BACnet object ID is not visible in the Excel
Web HTML Interface and the user does not need the BACnet object ID in order to
operate the Excel Web controller.
The BACnet object ID is a unique ID within a BACnet device.
BACnet Object IDs must be provided by or to the project engineer/vendor who is
responsible for the 3
rd
party BACnet device to be added to the CARE project, or who
is responsible for integrating the Excel Web controller into a 3
rd
party BACnet
system.
The BACnet object ID will be kept unique within a CARE project and is calculated
within CARE by the following Standard BACnet formula:
BACnet object ID = BACnet object type x 2
22
+ Object Instance number
The typical object addressing within a BACnet system is done by using the device
ID and the Object ID.
BACnet Object Object Type
Anlog input 0
Anlog output 1
Anlog value 2
Averaging 18
Binary input 3
Binary output 4
Binary value 5
Calendar 6
Command 7
Device 8
Event enrollment 9
File 10
Group 11
Life safety point 21
Life safety zone
22
Loop 12
Multi-state input
13
Multi-state ourput 14
Multi-state value 19
Notification class 15
Program
16
Schedule 17
Trend log
20