Honeywell Centraline FALCON - Analog Input; Analog Output

FALCON USER GUIDE
EN2Z-0962GE51 R0715 104
B C
B C
NORMAL FAULT
OFF- NORMAL
HIGH LIMIT
LOW LIMIT
Back to Normal
Back to Normal
To Off-Normal
To Off-Normal
To Fault
To Fault
C
A B
Recommendation Set the high and/or low limits to extremely high or low values, so that a real
measured value will not be above the limits.
Always enable the High limit Enable and Low Limit Enable options even if the Off-
Normal Reporting is disabled.
Analog Input
The following diagram shows the alarm behavior of an analog input.
Fig. 17. Alarm behavior of analog input datapoint
Analog Output
The following diagram shows the alarm behavior of an analog output.