USER GUIDE FALCON
207 EN2Z-0962GE51 R0715
View/Change Communication Settings
Communication settings include:
• Interface settings for serial ports, Ethernet, LON, Modem and Web-Server, such
as baudrate, IP address, neuron chip ID, automatic logout time of web server
• User name and password definition
• Selection of the serial port for modem connection
• Selection of remote front-end
• Dial out parameter (re-dial algorithm) definition
• E-Mail Alarming
Procedure 1. In the tree, expand the Advanced item, then the System Settings item and click
on Communication.
RESULT: On the Interface Settings tab you can view the Ethernet and LON
bus settings in the areas of the same name. In addition, you can set
baudrate of the serial ports and the logout time of the web server
(controller).
To Next Page
Loading...
