FALCON USER GUIDE
EN2Z-0962GE51 R0715 140
• Plant Name
• Plant Type
• Plant Description
Cycle Information
Shows application specific properties related to the plant such as:
• Current Program State (running or stopped)
• Last Start Date
• Last Stop Date
The application program controlling the plant can be stopped
individually by clicking the SHUTDOWN button and restarted by
clicking the RESTART button.
IMPORTANT
Stopping and restarting the program does not stop and restart the
entire controller application, but parts of the application which
control that particular plant.
Error / Halt Information
Shows errors and halt information such as:
• Reason for Halt
• Error Details
NOTE: You can only shutdown or restart the control program if your access level is
equal to or higher than the access level defined for these actions in the
User Administration.
Fast Access Lists
Fast access lists are user specific lists which show suited information to dedicated
people (e.g. electrician, project engineer, tenant).
Information can be either a list of certain datapoints, e.g. all outputs by using a filter
template, or a list showing the impact of selected parameter values on datapoints.
Fast access lists can be created on controller level and on plant level. In plant
related fast access lists, you can only view datapoints/parameters of this particular
plant whereas controller related fast access lists can comprise datapoints/parameter
of different plants of the controller.
Create Fast Access List
To Next Page
Loading...
