USER GUIDE FALCON
211 EN2Z-0962GE51 R0715
• DNS-Server1 IP Address
Shows the IP address of DNS server1.
• DNS-Server2 IP Address
Shows the IP address of DNS server2.
• SMTP Server
Shows the name or the IP address of the SMTP server.
• E-Mail Address (Sender)
Shows the email address of the sender.
• E-Mail Mode
Shows one of the following email modes:
− Directly
Alarm emails are sent directly to the SMTP server of the DSL provider of
the recipient. The Excel Web can be accessed via port forwarding or
VPN.
− Call
Alarm emails are sent via modem (Call by Call) to the Internet Service
Provider of the recipient.
− Relay
A relay server as the first SMTP server receives the email from the Excel
Web and sends it to a second SMTP server of the recipient. The relay
server can reside in a customer network or at a DSL provider. The Excel
Web can be accessed via port forwarding or VPN.
• ISP Phone Number
Shows the phone number of the ISP (Internet Service Provider) if ´Dialup`
has been selected in CARE.
• ISP User
Shows the user name of the ISP (Internet Service Provider) if ´Dialup` has
been selected in CARE.
• ISP Password
Shows asterisks if a password for the ISP (Internet Service Provider) has
been used.
• E-Mail Subject Prefix String
Shows the default prefix of the email subject name. Default is ´Alarm`.
• E-Mail Send Repeat time
You can enable/disable and change the E-Mail Send Repeat time and
enable/disable the email alarming as described in steps 17 through 22 of the
“E-Mail Alarming” section.
Test E-Mail
Here you can perform an email test as described in steps 17 through 22 of the
“E-Mail Alarming” section.
9. Click the SUBMIT button to save settings on the Interface Settings, Modem
Settings and E-Mail tabs.
View LON Diagnostic Data
Procedure 1. In the tree, expand the Advanced item, the System Settings item and then the
Diagnostics item.
2. Click on LON Statistics.
RESULT: The Statistics tab displays. Here you can select LON statistic
properties for trending. The Active Trending checkbox shows
whether trending is active or not. For each property its current value
is displayed.
To Next Page
Loading...
