FALCON USER GUIDE
EN2Z-0962GE51 R0715 210
You can only change communication settings if your access level is equal or
higher than the access level defined for this action in the User Administration.
Dial-Out: Re-dial Algorithm
The dial-out settings are controller related.
• Wait for Dial Tone
Defines whether the controller should wait for a dial tone (YES) or not (NO)
before dialing
• Dial Method
Defines the method, tone or pulse dialing
• Loudspeaker
Defines whether the modem speaker should be switched ON or OFF
• Additional Command String
A string entered here, is sent to the modem whenever the communication
watchdog is started and before each dial-out attempt.
• Idle Time before Hang-up
Defines the time of inactivity in sec. after which the modem hangs up.
8. To view/change E-Mail settings, click on the E-Mail tab.
Common Settings
Here the e-mail alarming settings as entered in CARE are displayed.
To Next Page
Loading...
