USER GUIDE FALCON
139 EN2Z-0962GE51 R0715
controllers etc. Each file has a name, type (data type),
version (controller), sequence (version of application file) and
date.
Version indicates the firmware version.
Type indicates which Object Types are contained in the
application file.
Sequence indicates online changes, e.g. of Quick Access
Groups, Parameters, User Administration etc.
With every online change, the sequence number is
incremented.
Last Saved indicates the time when this application file was
created in the CARE tool (time of last CARE translation) or
when the file has been saved due to an online change.
Device Name
For 3
rd
party BACnet devices, a freely editable device name can be defined.
If the BACnet device is an Excel Web controller, the device name is the same as the
controller name.
IMPORTANT
Do not use blanks or special characters.
Display Plant Information
Please refer also to the "Plants" section, p. 115.
Procedure 1. In the tree on the left, expand the Advanced item, then the Plants item and click
on the single plant.
RESULT: On the Plant tab on the right, general plant data are displayed.
Plant Information
Shows general plant properties such as:
To Next Page
Loading...
